31 Mar 2009

AHL 07-01 58m AHTS Vessel

MEP Systems has launched its 1st a 58m AHTS Vessel under our very own MEP New Shipbuilding Program. The vessel is expected to deliver by end of November 2009.

MEP AHL 07-01 has a higher degree of out-fittings that are hard to find on other AHTS. Unlike most tugs built in China, over 90% of the AHL 07-01 equipment comes from G8 countries, thus making it more superior in terms of long term performance.
1) Azimuth steerable nozzled propellers
2) Joy stick configured control
3) IBS control
4) Mini M
5) Differential GPS
6) Auto telephone exchange
7) Medium speed engines with lower noise signature
8) Plate coolers for main machinery
9) Remote sounding of all tanks
10) Auto synchronisation of power generators
11) FW maker

The above superior equipments installed equates to an extended work capability normally not associated with AHTS including the prospect of conversion to DP notation and easy adoption as a geophysical survey vessel. Therefore, the owner of this band new vessel will enjoy a higher market potential not limited to only anchor handling and supply operations.

We are seeking for interested Buyer to contact us for more information.

Please refer to the specifications for AHL 07-01 58m AHTS Vessel .

31 Oct 2008

Delivery of MEP’s Offshore Hose Reel Spooler

MEP has supplied 1 unit of 35Ton Line Pull Hose Reel Spooler, weighs 80Ton, standing at 12m (L) x 7m (W) x 6.5m (H) for a seismic vessel working in South Africa. This is a customized product to meet customer’s specific requirement, and special attention was paid to its High Load Capacity with Constant Tension.

Accompanied with this Hose Reel Spooler are 2 units of 100T Hoist Winch and 15T Guide Winch with Hydraulic Power Packs.

20 Jun 2007

Delivery of MEP 75Ton Anchor Handling / Towing Winch

MEP has recently supplied 2 ship-sets of 75Ton Anchor Handling / Towing Winch to a shipyard in Batam for a new shipbuilding project. The specification of our winch is: -

Lower Drum
Drum Capacity: 1000m x 52mm dia. SWR
Rated Pull: 750kN x 15 m/min @ 1st layer
375kN x 30 m/min @ mid layer
Brake Holding: 150Ton (Static @1st layer)
Brake: Hydraulic Operated Band Type
Clutch: Hydraulic Operated Jaw Type

Upper Drum
Drum Capacity: 1000m of 52mm diameter wire rope
Rated Pull: 150Ton x 0~ 5 m/min (1st Layer)
72Ton x 0~ 10 m/min
35Ton x 0~20 m/min
Brake Holding: 225Ton (1st Layer, static)
Brake: Spring Applied, Hydraulic Release Band Type
Clutch: Hydraulically Operated Jaw Type

Electro-Hydraulic Power Pack to drive AHT Winch
Electric Motor: 2 x 75kW + 5.5kW c/w space heater
Starter: Star/Delta for 75kW Motor, DOL for 5.5kW Motor
Working Pressure: ~250Bar
 

19 May 2007

Launch of the 1st vessel built under MEP Shipbuilding Management Team

MEP has supplied 1 unit of 35Ton Line Pull Hose Reel Spooler, weighs 80Ton, standing at 12m (L) x 7m (W) x 6.5m (H) for a seismic vessel working in South Africa. This is a customized product to meet customer’s specific requirement, and special attention was paid to its High Load Capacity with Constant Tension.